The electromechanical series of electromechanical series based on the propulsion system consists of DC and AC motors and gearboxes, and the balance of the arm is balanced by a spring, which, while removing excess load from the engine and gearbox, creates a steady speed in the moving motion of the barrier. Local tensions are completely eliminated. It is worth noting that the system does not need to be serviced and periodically configured. In this regard, it should be noted that the system has a 100% efficiency over the atmosphere (temperature) of -20 ° C below zero to 55 ° C, and also with high volatility of electricity and Even the power outage of the system program is not interrupted.
All systems, including safety belts (IP24) and low voltage and high-power amps, have a power consumption of 300 watts for the Italian BFT company, which receives a very low flow of energy from the same equipment they do.
The MICHEL series of products with unlimited traffic from the BFT family is available for input widths (4 to 8 meters), the input voltage of the systems, as well as the output power of the gearboxes (24v / ac and 580-680 N).
The high operating cycle of the Italian BFT company with DC motors has made it possible to select and offer the optimal system for unrestricted traffic control systems.
The MICHELANGELO barrier series, manufactured by Italy's BFT company, has a high opening and closing speed that can be adjusted from 4, 6 to 8 seconds and reduces the speed of any tension and impact during the movement.
Some of the special features of the Italian BFT automation series are as follows:
The codec system of the remote controllers generates code up to 4.294.967.296 code with a frequency of MHz of 4333.94 which provides safe conditions for safety.
Due to the fact that the system with sensor eyes prevents the possible collision of the barrier arm with a person or vehicle during movement, the smart clutch will detect and react to the barrier with a barrier to the barrier. .
Bar code connectivity to both digital and analog control commanders, as well as the connectivity and handling of all safety equipment and magnetic circuits, such as loop detectors.
This system is capable of connecting to all automatic door equipment, traffic control and standard automation, and is included in the system program to connect to PLC, BMS networks. Another unique feature of the system is the possibility of activating image and imaging control systems in The area will begin, for example, by opening the capture door.
accessories :
BFTclonix-4
BFT bar
BFT bt-bat
BFT cc-130
BFT cellula-130
BFT cellula-50
BFT clonix-2e
BFT clonix2-2048
BFT mitto-2-12v
BFT mitto-4-12v
BFT PROXIMA
BFT ray-x-24-230v
