POEX0100

Compare

10/100 PoE extender

PoE (IEEE 802.3af) and PoE+ (IEEE 802.3at) compliant

Extension up to 600 m (1968.5 ft) using 5 GV-POEX0100

Compatible with GV-IP Cameras

No additional power supply required

SPECIFICATION
REVIEW
DOWNLOAD
COMMENTS

Ports
Network Standard	10/100 Mbps half/full duplex
Connectors	RJ-45
Network cables	Cat5e or higher

Mechanical
LED Indicator	4 LEDs: Power x2, Network x2Power indicator: PoE enable (Amber)Network indicator: Link (Green), Activity (Green Blink)
PoE Control Button	On / Off

General
Operating Temperature
Humidity	10% to 90% (no condensation)
Environment	Indoor
Dimensions (L x W x H)	102.8 x 28.8 x 20 mm (4.05" x 1.13" x 0.79")
Weight	87 g (0.19 lb)
Regulatory	CE, FCC Class A

Brands:

ژئوویژن

Product Features:

راهکارهای پی اُ یی

Tags:

PoE Switch, ویندوز10 64-بیت, geovision, , , , , ,

GV-POEX0100 is a single-port, 10/100 PoE extender that can extend the distance between a PoE switch and a GV-IP Camera by 100 m (328.08 ft) for every extender installed. They can be serially connected, with no additional power supply, to transmit power and data to a GV-IP Camera as far as up to 600 meters (1968.5 ft) away from a PoE switch.

GV-IP Cameras Powered by PoE

	Brand & Model
PD of GV-IP Cameras	GeoVision		Third-Party PoE Switches (IEEE 802.3at)
PD of GV-IP Cameras	GV-POE0801 / 0811 GV-POE1601 / 1611 GV-POE2401 / 2411	GV-POE0400 GV-POE0800 GV-POE0810	Third-Party PoE Switches (IEEE 802.3at)
PD < 6.49 W (IEEE 802.3af)	600m	400m	400m
PD 6.5 W ~ 12.95 W (IEEE 802.3af)	400m	200m	200m
PD 13 W ~ 25.5 W (IEEE 802.3at)	200m	-	-
PD > 25.5 W	-	-	-

Note:

Each GV-POEX0100 extends another 100 m (328.08 ft) between the PoE switch and the GV-IP Camera. Therefore, a distance of 200 m (656.17 ft) requires one GV-POEX0100 and 400 m (1312.34 ft) requires three etc.
GV-POE0100 can only be connected using CAT-5e cables, TIA/EIA-568-B, with the maximum DC resistance of 9.38 ohms/100 m.

GV-IP Cameras Powered by Power Adapters

Brand & Model	GeoVision		Third-Party PoE Switches (IEEE 802.3at)
	GV-POE0801 / 0811 GV-POE1601 / 1611 GV-POE2401 / 2411	GV-POE0400 GV-POE0800 GV-POE0810
GV-IP Cameras	600m	400m	400m

The maximum distance allowed between a PoE switch and a GV-IP Camera depends on the PoE switch type, PoE power output of the connected device (PD) and the type of power supply.

GV-POEX0100 is only compatible with third-party switches that comply to PoE+ (IEEE 802.3at) and is not compatible with GV-PA191/481/482/901.

GV-POEX0100 supports all GV-IP Cameras when installed with a power adapter and does not support the following models when powered by PoE:

GV-BX2510-E / 5310-E
GV-FE3403 / 5303
GV-VD2540-E / 5340-E
GV-SD220 / 220-S

GV-POEX0100 is only compatible with the following GeoVision PoE switches of the indicated firmware versions:

GV-POE0801 / 1601 / 2401 (V1.03 or later)
GV-POE0811 / 1611 / 2411 (V1.01 or later)

Attachment	Size
Geovision POE Switch Extender GV-POEX0100 Datasheet	270.66 KB
Geovision POE Switch Extender GV-POEX0100 Installation Guide	175.01 KB